How to remove the marks of EVA foam double-sided tape

    How to solve the mark of EVA foam double-sided tape? Xiaobian Leliang shares a few simple removal methods.

    1. Drop some nail polish remover, soak it for a while, and then wipe it with a paper towel to ensure that the surface of the item is as clean as new. But there is a problem. Because nail polish remover is very corrosive, it cannot be used on the surface of articles that are afraid of corrosion, such as lacquered furniture, laptop shells, etc. (The first time I used this method, although the offset was clean, the notebook The lacquer surface of the outer shell has been greatly damaged, and some nail polish remover has flowed into the inner shell of the computer, which corroded the inner shell). Therefore, although nail polish remover removes the traces of double-sided foam tape, you must pay attention to protecting items with traces from corrosion.

    2. Offset printing has a long-lasting surface, a large area, difficult to clean, and the surface of items that are not easily corroded. The hair dryer heats up the offset printing, and the hair dryer is turned on to a high degree of heat. Blow against the tape marks for a while to let it soften slowly, and then wipe it off with a harder eraser or a soft cloth. Scope of application: Suitable for items with relatively small tape traces and long-lasting offset printing, but the items must have sufficient heat resistance.

    3. Medical alcohol soaking offset. Drop some medical alcohol on the surface of the mark, soak it for a while, then wipe it off with a soft cloth or paper towel. Of course, items with tape marks must not be afraid of alcohol corrosion.

    4. Similarly, if you have expired perfume or astringent toner, it can also be used to replace alcohol, because it has a certain alcohol content, and these two can be applied to any item, after all, the alcohol content in it is not Will be too much. Scope of application: It is used for small areas and new traces, but it is useless for large areas of tape traces.

    Shanghai Moyuan Industrial Co., Ltd. started investment and production in Shanghai in 2000. Its subsidiaries include Shanghai Xianyou New Material Technology Co., Ltd. The company has introduced foreign automated production equipment and domestic sophisticated independent research and development precision equipment. Scientific management, from raw materials to The one-stop production of finished products effectively reduces costs and gives profits to new and old customers. The company adheres to the rapid response and service-oriented marketing strategy, strengthens quality management, emphasizes environmental protection awareness, resolutely control costs, and reasonable prices to ensure that superior product quality meets the needs and expectations of customers.

    The company produces and supplies; PE XPE IXPE EVA EPDM CR SBR PVC NBR PVC foam materials. Sheets or rolls are available, thin 0.1 mm to 100 mm thick, finished or semi-finished tapes, air-conditioning insulation pipes, insulation boards, sports equipment handles Cover, PE and EVA mats, children crawling mats, yoga mats, camping mats, outdoor moisture-proof mats, shock-proof gaskets or sealing gaskets, etc.